CONTRACT FOR THE SUPPLY AND INSTALLATION OF ELECTRONIC INSTRUMENTATION AND MEASUREMENT EQUIPMENT TO THE INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORY

INL, International Iberian Nanotechnology Laboratory

THE SUBJECT MATTER OF THIS CONTRACT IS THE SUPPLY AND INSTALLATION OF ELECTRONIC INSTRUMENTATION AND MEASUREMENT EQUIPMENT TO THE INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORY
Lot # Description
1 High Power DC Supply
2 Precision Power Supplies and Meter
3 High-Voltage Precision Power Supply and Meter
4 Picoammeter Voltage Source
5 80W Triple DC Power Supply
6 35W Triple DC Power Supply
7 Dual Channel Battery Simulator
8 AC and DC Current Source
9 80 MHz Function/Arbitrary Waveform Generator
10 Dual Channel 30MHz Arbitrary Waveform Generator
11 6 GHz Arbitrary Signal Generator
12 High Sampling Rate 2-Channel Lock-In Amplifier
13 High-Frequency Lock-In Amplifier
14 Low-Noise Voltage Preamplifier
15 100 MHz, 4 Analog Plus 16 Digital Channels Oscilloscope
16 500 MHz, 4 Analog Channels Oscilloscope
17 6.5 Digits Digital Multimeter
18 20Hz-2MHz Precision LCR Meter
19 Multifunction Switch Measurement Unit
20 USB/GPIB High-Speed Interface and Cables

Prazo de entrega

O prazo para a recepção das propostas era 2013-07-26. O concurso foi publicado em 2013-06-27.

Fornecedores

Os seguintes fornecedores são mencionados nas decisões de adjudicação ou noutros documentos de contratação:

Quem?

• INL, International Iberian Nanotechnology Laboratory

O quê?

• Material electrónico, electromecânico e electrotécnico › Equipamento electrónico

Onde?

• Norte › Cávado

Histórico de aquisições

Data	Documento
2013-06-27	Anúncio de concurso
2013-10-04	Anúncio de adjudicação

Anúncio de concurso (2013-06-27)
Objecto
Âmbito do concurso
Título: Equipamento electrónico
Quantidade ou extensão:

Lot # Description and Quantity1 High Power DC Supply 22 Precision Power Supplies and Meter 73 High-Voltage Precision Power Supply and Meter 14 Picoammeter Voltage Source 25 80W Triple DC Power Supply 26 35W Triple DC Power Supply 17 Dual Channel Battery Simulator 18 AC and DC Current Source 29 80 MHz Function/Arbitrary Waveform Generator 110 Dual Channel 30MHz Arbitrary Waveform Generator 111 6 GHz Arbitrary Signal Generator 112 High Sampling Rate 2-Channel Lock-In Amplifier 113 High-Frequency Lock-In Amplifier 114 Low-Noise Voltage Preamplifier 115 100 MHz, 4 Analog Plus 16 Digital Channels Oscilloscope 216 500 MHz, 4 Analog Channels Oscilloscope 117 6.5 Digits Digital Multimeter 618 20Hz-2MHz Precision LCR Meter 119 Multifunction Switch Measurement Unit 120 USB/GPIB High-Speed Interface and Cables 1152 420

Valor total do procedimento: 9 000 💰
Metadados do anúncio
Idioma original: inglês 🗣️
Tipo de documento: Anúncio de concurso
Natureza do contrato: Fornecimentos
Regulamento: União Europeia
Vocabulário comum para os contratos públicos (CPV)
Código: Equipamento electrónico 📦

Procedimento
Tipo de procedimento: Concurso público
Tipo de proposta: Apresentação de uma proposta relativa a um ou mais lotes
Critérios de atribuição
Proposta economicamente mais vantajosa

Entidade adjudicante
Identidade
País: Portugal 🇵🇹
Tipo de autoridade adjudicante: Instituição Europeia/Agência ou organização internacional
Nome da autoridade adjudicante: INL, International Iberian Nanotechnology Laboratory
Endereço postal: Avenida Mestre José Veiga
Código postal: 4715 330
Cidade postal: Braga
Contacto
Endereço Internet: http://www.inl.int 🌏
Correio electrónico: adrian.watson@inl.int 📧
Telefone: +351 253140112 📞
Fax: +351 253140119 📠

Referência
Datas
Data de envio: 2013-06-27 📅
Prazo de apresentação: 2013-07-26 📅
Data de publicação: 2013-07-02 📅
Identificadores
Número do anúncio: 2013/S 126-215475
Número JO-S: 126

Objecto
Âmbito do concurso
Breve descrição:

THE SUBJECT MATTER OF THIS CONTRACT IS THE SUPPLY AND INSTALLATION OF ELECTRONIC INSTRUMENTATION AND MEASUREMENT EQUIPMENT TO THE INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORY

Lot # Description

1 High Power DC Supply

2 Precision Power Supplies and Meter

3 High-Voltage Precision Power Supply and Meter

4 Picoammeter Voltage Source

5 80W Triple DC Power Supply

6 35W Triple DC Power Supply

7 Dual Channel Battery Simulator

8 AC and DC Current Source

9 80 MHz Function/Arbitrary Waveform Generator

10 Dual Channel 30MHz Arbitrary Waveform Generator

11 6 GHz Arbitrary Signal Generator

12 High Sampling Rate 2-Channel Lock-In Amplifier

13 High-Frequency Lock-In Amplifier

14 Low-Noise Voltage Preamplifier

15 100 MHz, 4 Analog Plus 16 Digital Channels Oscilloscope

16 500 MHz, 4 Analog Channels Oscilloscope

17 6.5 Digits Digital Multimeter

18 20Hz-2MHz Precision LCR Meter

19 Multifunction Switch Measurement Unit

20 USB/GPIB High-Speed Interface and Cables

Número do lote: 1
Designação do lote: Lot 1 - High Power DC Supplies
Breve descrição:

- At least 400W of power available- Maximum voltage limit of at least 50V- Maximum current limit of at least 8A- Possibility of using the power supply both as a voltage source and as a current source.- Output impedance <=150 Ω when used as a voltage source- Output impedance >50 kΩ when used as a current source- Rise time <35s in a 10%-90% excursion.- Output bandwidth < 25kHz- Maximum noise level of 30mV (integrated between 20Hz and 20MHz) when operated as a voltage source- Maximum noise level of 0.3% (integrated between 20Hz and 20MHz) when operated as a current source- GPIB remote interface- Rack-mount Interface

- At least 400W of power available

- Maximum voltage limit of at least 50V

- Maximum current limit of at least 8A

- Possibility of using the power supply both as a voltage source and as a current source.

- Output impedance <=150 Ω when used as a voltage source

- Output impedance >50 kΩ when used as a current source

- Rise time <35s in a 10%-90% excursion.

- Output bandwidth < 25kHz

- Maximum noise level of 30mV (integrated between 20Hz and 20MHz) when operated as a voltage source

- Maximum noise level of 0.3% (integrated between 20Hz and 20MHz) when operated as a current source

- GPIB remote interface

- Rack-mount Interface

Quantidade ou extensão: Two Units
Número do lote: 2
Designação do lote: Lot 2 - Precision Power Supplies and Meters
Breve descrição:

- Operation both as voltage source and as current…

… source- Ability to measure both output current and output voltage- 0.015% measurement accuracy with 5.5 digits- 1700 readings/second with 4.5 digits- 20W DC output power- Output DC current switchable between 10pA and 1A (output voltage switchable between 1µV and 200V)- Applied current resolution: 50pA for currents lower than 1µA and 10µA for currents between 100mA and 1A.- Applied voltage resolution: 5V for voltages bellow 200mV and 5mV for voltages larger than 20V and up to 200V- Integrated output voltage measurement with measurement rates switchable between 50Hz and 5000Hz.- Memory buffer for a maximum of 2000 readings.- GPIB Interface- Rack mount kit

… source

- Ability to measure both output current and output voltage

- 0.015% measurement accuracy with 5.5 digits

- 1700 readings/second with 4.5 digits

- 20W DC output power

- Output DC current switchable between 10pA and 1A (output voltage switchable between 1µV and 200V)

- Applied current resolution: 50pA for currents lower than 1µA and 10µA for currents between 100mA and 1A.

- Applied voltage resolution: 5V for voltages bellow 200mV and 5mV for voltages larger than 20V and up to 200V

- Integrated output voltage measurement with measurement rates switchable between 50Hz and 5000Hz.

- Memory buffer for a maximum of 2000 readings.

- GPIB Interface

- Rack mount kit

Quantidade ou extensão: Seven Units
Número do lote: 3
Designação do lote: Lot 3 – High-Voltage Precision Power Supply and Meter
Breve descrição:

- Operation both as voltage source and as current source- Ability to measure both output current and output voltage- 0.015% measurement accuracy with 5.5 digits- 1700 readings/second with 4.5 digits- 20W DC output power- Output DC current switchable between 10pA and 1A (output voltage switchable between 1µV and 1100V)- Applied current resolution: 50pA for currents lower than 1µA and 10µA for currents between 100mA and 1A.- Applied voltage resolution: 5V for voltages bellow 200mV and 5mV for voltages larger than 20V and up to 1100V- Integrated output voltage measurement with measurement rates switchable between 50Hz and 5000Hz.- Memory buffer for a maximum of 2000 readings.- GPIB Interface- Rack mount kit

- Output DC current switchable between 10pA and 1A (output voltage switchable between 1µV and 1100V)

- Applied voltage resolution: 5V for voltages bellow 200mV and 5mV for voltages larger than 20V and up to 1100V

Quantidade ou extensão: One Unit
Número do lote: 4
Designação do lote: Lot 4 – Picoammeter Voltage Sources
Breve descrição:

- 10 fA maximum resolution- Current range from 2 nA to 20 mA- 51/2 digit resolution- <200 V burden voltage- Maximum input capacitance for stable operation to 10 nF on 2 nA to 2 A range and 1F on 20 A to 20 mA range- Alternating voltage method ohms measurements- Automated voltage sweeps for I-V characterization- Floating measurements up to 500 V- Three output voltage ranges (± 10.1 V, ± 50.5 V, ± 505.0 V) with step sizes of 200 V, 1 mV, 10 mV- Maximum noise of 50 Vpp , 150 Vpp , 1.5 mVpp (in the bandwidth from 0.1 Hz to 10 Hz)- Maximum wideband noise of 30 mVpp (in the bandwidth from 0.1 Hz to 20 MHz)- Output voltage source resistance less than 2.5 Ω- Selectable current limit- Up to 1000 readings/second- IEEE-488 and RS-232 interfaces- Analog output- Digital I/O- Rack-mount kit

- 10 fA maximum resolution

- Current range from 2 nA to 20 mA

- 51/2 digit resolution

- <200 V burden voltage

- Maximum input capacitance for stable operation to 10 nF on 2 nA to 2 A range and 1F on 20 A to 20 mA range

- Alternating voltage method ohms measurements

- Automated voltage sweeps for I-V characterization

- Floating measurements up to 500 V

- Three output voltage ranges (± 10.1 V, ± 50.5 V, ± 505.0 V) with step sizes of 200 V, 1 mV, 10 mV

- Maximum noise of 50 Vpp , 150 Vpp , 1.5 mVpp (in the bandwidth from 0.1 Hz to 10 Hz)

- Maximum wideband noise of 30 mVpp (in the bandwidth from 0.1 Hz to 20 MHz)

- Output voltage source resistance less than 2.5 Ω

- Selectable current limit

- Up to 1000 readings/second

- IEEE-488 and RS-232 interfaces

- Analog output

- Digital I/O

- Rack-mount kit

Número do lote: 5
Designação do lote: Lot 5 – 80W Triple DC Power Supplies
Breve descrição:

- 80W power supply- Triple independent output power supply (Output 1 : 0 to 6 V – 0 to 5A , Output 2 : 0 to +25 V – 0 to 1A , Output 3 : 0 to -25 V – 0 to 1A)- Less than 0.01% + 2 mV voltage load and line regulation for all outputs- Less than 0.01% + 250 A current load and line regulation for all outputs- Maximum noise of 350 Vrms / 2 mVpp (in the bandwidth from 20 Hz to 20 MHz) in normal mode voltage- Maximum noise of 500 Arms (in the bandwidth from 20 Hz to 20 MHz) in normal mode current- Maximum noise of 1.5 Arms (in the bandwidth from 20 Hz to 20 MHz) in common mode current- Voltage programming and readback accuracy at 25ºC ± 5ºC equal to 0.1% + 5 mV for output 1 and 0.05% + 20mV for output 2 and 3- Current programming and readback accuracy at 25ºC ± 5ºC equal to 0.2% + 10 mA for output 1 and 0.15% + 4 mV for output 2 and 3- GPIB and RS-232 for remote interface- Rack-mount kit included

- 80W power supply

- Triple independent output power supply (Output 1 : 0 to 6 V – 0 to 5A , Output 2 : 0 to +25 V – 0 to 1A , Output 3 : 0 to -25 V – 0 to 1A)

- Less than 0.01% + 2 mV voltage load and line regulation for all outputs

- Less than 0.01% + 250 A current load and line regulation for all outputs

- Maximum noise of 350 Vrms / 2 mVpp (in the bandwidth from 20 Hz to 20 MHz) in normal mode voltage

- Maximum noise of 500 Arms (in the bandwidth from 20 Hz to 20 MHz) in normal mode current

- Maximum noise of 1.5 Arms (in the bandwidth from 20 Hz to 20 MHz) in common mode current

- Voltage programming and readback accuracy at 25ºC ± 5ºC equal to 0.1% + 5 mV for output 1 and 0.05% + 20mV for output 2 and 3

- Current programming and readback accuracy at 25ºC ± 5ºC equal to 0.2% + 10 mA for output 1 and 0.15% + 4 mV for output 2 and 3

- GPIB and RS-232 for remote interface

- Rack-mount kit included

Número do lote: 6
Designação do lote: Lot 6 – 35W Triple DC Power Supply
Breve descrição:

- 35W power available- Triple independent output power supply (Output 1 : 0 to 6 V – 0 to 2.5A , Output 2 : 0 to +20 V – 0 to 0.5A , Output 3 : 0 to -20 V – 0 to 0.5A)- Auto-tracking voltage output feature- Less than 0.01% + 2 mV for load and line regulation- Maximum noise of 350 Vrms / 1.5 mVpp (in the bandwidth from 20 Hz to 20 MHz) in normal mode voltage- Maximum noise of 1 Arms (in the bandwidth from 20 Hz to 20 MHz) in common mode current- Meter accuracy of ± 0.5% + 2 counts at 25ºC ± 5ºC- Voltage/Current meter resolution of 10 mV/10 mA- Rack-mount kit included

- 35W power available

- Triple independent output power supply (Output 1 : 0 to 6 V – 0 to 2.5A , Output 2 : 0 to +20 V – 0 to 0.5A , Output 3 : 0 to -20 V – 0 to 0.5A)

- Auto-tracking voltage output feature

- Less than 0.01% + 2 mV for load and line regulation

- Maximum noise of 350 Vrms / 1.5 mVpp (in the bandwidth from 20 Hz to 20 MHz) in normal mode voltage

- Maximum noise of 1 Arms (in the bandwidth from 20 Hz to 20 MHz) in common mode current

- Meter accuracy of ± 0.5% + 2 counts at 25ºC ± 5ºC

- Voltage/Current meter resolution of 10 mV/10 mA

Número do lote: 7
Designação do lote: Lot 7 – Dual Channel Battery Simulator
Breve descrição:

- Ultrafast response to transient load currents- Choice of single- or dual-channel supplies- Optimized for development and testing of battery-powered devices- Variable output resistance for simulating battery response- Pulse peak, average, and baseline current measurements- 100nA DC current sensitivity- Current step measure function- Sink up to 3A- Open sense lead detection- Built-in digital voltmeter- For output #1 (Battery)o Output voltage from 0 to 15 V with ± (0.05% + 3 mV) accuracy and 1 mV resolutiono Load regulation of 0.01% + 2 mV and line regulation 0.5 mVo Maximum transient recovery time of 100 s with a 400 mV voltage dropo Maximum continuous average output current of 5 Ao Maximum continuous average sink current of 3 Ao Load regulation of 0.01% + 1 mA and line regulation 0.5 mAo 3 different current measurement operation (Pulse current, Burst mode current and Long integration mode)- For output #2 (Charger)o Output voltage from 0 to 15 V with ± (0.05% + 10 mV) accuracy and 10 mV resolutiono Load regulation of 0.01% + 2 mV and line regulation 0.5 mVo Maximum transient recovery time of 100 s with a 200 mV voltage dropo Maximum continuous average output current of 5 Ao Maximum continuous average sink current of 3 Ao Load regulation of 0.01% + 1 mA and line regulation 0.5 mAo 3 different current measurement operation (Pulse current, Burst mode current and Long integration mode)- Rack-mount kit included

- Ultrafast response to transient load currents

- Choice of single- or dual-channel supplies

- Optimized for development and testing of battery-powered devices

- Variable output resistance for simulating battery response

- Pulse peak, average, and baseline current measurements

- 100nA DC current sensitivity

- Current step measure function

- Sink up to 3A

- Open sense lead detection

- Built-in digital voltmeter

- For output #1 (Battery)

o Output voltage from 0 to 15 V with ± (0.05% + 3 mV) accuracy and 1 mV resolution

o Load regulation of 0.01% + 2 mV and line regulation 0.5 mV

o Maximum transient recovery time of 100 s with a 400 mV voltage drop

o Maximum continuous average output current of 5 A

o Maximum continuous average sink current of 3 A

o Load regulation of 0.01% + 1 mA and line regulation 0.5 mA

o 3 different current measurement operation (Pulse current, Burst mode current and Long integration mode)

- For output #2 (Charger)

o Output voltage from 0 to 15 V with ± (0.05% + 10 mV) accuracy and 10 mV resolution

o Maximum transient recovery time of 100 s with a 200 mV voltage drop

Número do lote: 8
Designação do lote: Lot 8 – AC and DC Current Sources
Breve descrição:

- Source and sink (programmable load) from 100 fA to 100…

… mA- 1014 output impedance for ensuring stable current sourcing into variable loads- 65000-point source memory to allow executing comprehensive test current sweeps directly from the current source- Built-in RS-232, GPIB, Trigger Link, and digital I/O interfaces- Reconfigurable triax output for matching different application's guarding requirements- Source AC currents from 4pA to 210mA peak-to-peak for AC characterization of components and materials (10 MHz output update rate for generating smooth sine waves up to 100 kHz)- Built-in standard and arbitrary waveform generators with 1mHz to 100kHz frequency- Programmable pulse widths as short as 5μs- Rack mount kit

… mA

- 1014 output impedance for ensuring stable current sourcing into variable loads

- 65000-point source memory to allow executing comprehensive test current sweeps directly from the current source

- Built-in RS-232, GPIB, Trigger Link, and digital I/O interfaces

- Reconfigurable triax output for matching different application's guarding requirements

- Source AC currents from 4pA to 210mA peak-to-peak for AC characterization of components and materials (10 MHz output update rate for generating smooth sine waves up to 100 kHz)

- Built-in standard and arbitrary waveform generators with 1mHz to 100kHz frequency

- Programmable pulse widths as short as 5μs

Número do lote: 9
Designação do lote: Lot 9 – 80 MHz Function/Arbitrary Waveform Generator
Breve descrição:

- Capability of generating sine waves (1μHz to 80MHz), square waves (1μHz to 80MHz), pulses (500μHz to 50MHz), ramp functions (1μHz to 1MHz) and arbitrary waveforms (1μHz to…

… 25MHz)- Waveform amplitude range between 10mVpp to 10Vpp (with a 50Ω load)- Amplitude resolution of 12 bits- Sample rate of 200Msample/s- Output impedance switchable between 50Ω and >10MΩ- GPIB remote control interface- Rack mount kit

… 25MHz)

- Waveform amplitude range between 10mVpp to 10Vpp (with a 50Ω load)

- Amplitude resolution of 12 bits

- Sample rate of 200Msample/s

- Output impedance switchable between 50Ω and >10MΩ

- GPIB remote control interface

Número do lote: 10
Designação do lote: Lot 10 – Dual Channel 30MHz Arbitrary Waveform Generator
Breve descrição:

- Frequency range between 1Hz and 30MHz- Frequency resolution of 1Hz- Jitter noise lower than 40ps- Rise time lower than 8.7ns- 2 output channels with adjustable phase shift between channels- Memory for 1Msamples.- Ability to generate sine, ramp, pulse, square and ramp signals.- 16 bits voltage resolution- Adjustable output voltage amplitude between 1mV and 10V with a 50Ohm load.- GPIB Interface- Rack mount kit

- Frequency range between 1Hz and 30MHz

- Frequency resolution of 1Hz

- Jitter noise lower than 40ps

- Rise time lower than 8.7ns

- 2 output channels with adjustable phase shift between channels

- Memory for 1Msamples.

- Ability to generate sine, ramp, pulse, square and ramp signals.

- 16 bits voltage resolution

- Adjustable output voltage amplitude between 1mV and 10V with a 50Ohm load.

Número do lote: 11
Designação do lote: Lot 11 – 6 GHz Arbitrary Signal Generator
Breve descrição:

- Frequency range between 9kHz and 6GHz- Programmable output power amplitude between -140 and +18dBm- Output amplitude resolution of 0.01 dB- Output accuracy better than 0.15dB- Jitter noise better than 0.6ps at 150MHz- Jitter noise better than 80fs at 2.5GHz- Frequency resolution of 1Hz- Ability to generate sine, triangle, square, ramp and pulse signals.- GPIB Interface- Rack mount kit

- Frequency range between 9kHz and 6GHz

- Programmable output power amplitude between -140 and +18dBm

- Output amplitude resolution of 0.01 dB

- Output accuracy better than 0.15dB

- Jitter noise better than 0.6ps at 150MHz

- Jitter noise better than 80fs at 2.5GHz

- Ability to generate sine, triangle, square, ramp and pulse signals.

Número do lote: 12
Designação do lote: Lot 12 – High Sampling Rate 2-Channel Lock-In Amplifier
Breve descrição:

- 2 input channels- 2 output channels- Demodulator filter time constant adjustable between 1s and 500s- Integrated solution to visualize directly the input signal in time-domain and frequency-domain- Adjustable input impedance (50Ω and 1MΩ)- Input noise voltage <=5nV/Hz0.5- Dynamic reserve of 120dB- Input range from -3V to 3V or better- Input sampling rate of at least 210 MSamples/s with 14bits A/D conversion- Input frequency range between 0.7Hz and 50MHz- Output frequency range between DC and 50MHz- Output range from -10V to 10V- Output D/A conversion of 16 bits- Reference phase resolution of 1 degree.- Filter slope adjustable between 6 to 48 dB/Oct- Rack mount kit

- 2 input channels

- 2 output channels

- Demodulator filter time constant adjustable between 1s and 500s

- Integrated solution to visualize directly the input signal in time-domain and frequency-domain

- Adjustable input impedance (50Ω and 1MΩ)

- Input noise voltage <=5nV/Hz0.5

- Dynamic reserve of 120dB

- Input range from -3V to 3V or better

- Input sampling rate of at least 210 MSamples/s with 14bits A/D conversion

- Input frequency range between 0.7Hz and 50MHz

- Output frequency range between DC and 50MHz

- Output range from -10V to 10V

- Output D/A conversion of 16 bits

- Reference phase resolution of 1 degree.

- Filter slope adjustable between 6 to 48 dB/Oct

Número do lote: 13
Designação do lote: Lot 13 – High-Frequency Lock-In Amplifier
Breve descrição:

- 2 input/output channels- Adjustable input impedance (50Ω and 1MΩ)- Input noise voltage <=8nV/Hz0.5- 25 kHz to 200 MHz frequency range- Sensitivity from 100 nVrms to 1 Vrms full scale in <1 Mhz, 1 μVrms to 1 Vrms full scale in <50 Mhz and 10 μVrms to 1 Vrms full scale in <200 Mhz- Up to 80 dB dynamic reserve- Demodulator filter time constants from 100 μs to 30 ks (6, 12, 18 or 24 dB/oct rolloff)- “No Time Constant” mode (10 μs to 20 μs update rate)- Auto-gain, -phase, -reserve and –offset- Two 16-bit DACs and ADCs- Internal or external reference- Output range from -10V to 10V with 1mV resolution- 41/2 digit LED with 40-segment bar graph for channels display- GPIB and RS-232 interfaces- Rack-mount kit included

- 2 input/output channels

- Input noise voltage <=8nV/Hz0.5

- 25 kHz to 200 MHz frequency range

- Sensitivity from 100 nVrms to 1 Vrms full scale in <1 Mhz, 1 μVrms to 1 Vrms full scale in <50 Mhz and 10 μVrms to 1 Vrms full scale in <200 Mhz

- Up to 80 dB dynamic reserve

- Demodulator filter time constants from 100 μs to 30 ks (6, 12, 18 or 24 dB/oct rolloff)

- “No Time Constant” mode (10 μs to 20 μs update rate)

- Auto-gain, -phase, -reserve and –offset

- Two 16-bit DACs and ADCs

- Internal or external reference

- Output range from -10V to 10V with 1mV resolution

- 41/2 digit LED with 40-segment bar graph for channels display

- GPIB and RS-232 interfaces

Número do lote: 14
Designação do lote: Lot 14 – Low-Noise Voltage Preamplifier
Breve descrição:

- Voltage preamplifier with 4 nV/√Hz input noise, 1 MHz…

… bandwidth- Variable gain from 1 to 50,000- AC or DC coupled- Two configurable signal filters- Differential and single-ended inputs- Line or battery operation- RS-232 interface- Rack mount kit

… bandwidth

- Variable gain from 1 to 50,000

- AC or DC coupled

- Two configurable signal filters

- Differential and single-ended inputs

- Line or battery operation

- RS-232 interface

Número do lote: 15
Designação do lote: Lot 15 – 100 MHz, 4 Analog Plus 16 Digital Channels Oscilloscopes
Breve descrição:

- Oscilloscope with bandwidth (-3dB) of 100…

… MHz- Calculated rise time (10 - 90%) equal or below 3.5 ns- 4 analog inputs and at least 16 digital input channels- Analogue inputso Sample rates up to 4 GSa/s (half channel) and 2 GSa/s (all channel)o Memory depth of at least 2 Mptso WVGA displayo Waveform update rate > 1 million waveforms per secondo Support for 2 active probeso AC and DC couplingo Selectable input impedance of 1 M and 50o Input sensitivity range of 1 mV/div to 5 V/div, 8 bits vertical resolutiono Maximum input voltage of 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpko Channel-to-channel isolation > 100:1 from DC to 100 MHzo Offset range up to ± 50 Vo 5 ns/div to 50 s/div time base range with 25 ppm accuracyo Main, zoom, roll and XY modes- Digital channelso TTL, 5V CMOS, ECL and user-defined (± 8.0 V in 10 mV steps) threshold selectionso Maximum input voltage of ± 40 V peak CAT I; transient overvoltage 800 Vpko Threshold accuracy of about ± 100 mVo Maximum input dynamic range of ± 10 V about thresholdo Minimum voltage swing of 500 mVppo Input impedance of 100 k, input capacitance of about 8 pFo 1 bit vertical resolutiono Minimum detectable pulse width of 5 ns, channel-to-channel skew better than 3 ns- Normal, peak detect, averaging, high resolution and segmented modes- Multiple trigger sources, modes, coupling and selections- Cursor, automatic and counter waveform measurements- Conventional arithmetic and FFT math functions- Built-in function/arbitrary waveform generator and digital voltmeter- GPIB or USB interfaces for remote control- Rack mount kit

… MHz

- Calculated rise time (10 - 90%) equal or below 3.5 ns

- 4 analog inputs and at least 16 digital input channels

- Analogue inputs

o Sample rates up to 4 GSa/s (half channel) and 2 GSa/s (all channel)

o Memory depth of at least 2 Mpts

o WVGA display

o Waveform update rate > 1 million waveforms per second

o Support for 2 active probes

o AC and DC coupling

o Selectable input impedance of 1 M and 50

o Input sensitivity range of 1 mV/div to 5 V/div, 8 bits vertical resolution

o Maximum input voltage of 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk

o Channel-to-channel isolation > 100:1 from DC to 100 MHz

o Offset range up to ± 50 V

o 5 ns/div to 50 s/div time base range with 25 ppm accuracy

o Main, zoom, roll and XY modes

- Digital channels

o TTL, 5V CMOS, ECL and user-defined (± 8.0 V in 10 mV steps) threshold selections

o Maximum input voltage of ± 40 V peak CAT I; transient overvoltage 800 Vpk

o Threshold accuracy of about ± 100 mV

o Maximum input dynamic range of ± 10 V about threshold

o Minimum voltage swing of 500 mVpp

o Input impedance of 100 k, input capacitance of about 8 pF

o 1 bit vertical resolution

o Minimum detectable pulse width of 5 ns, channel-to-channel skew better than 3 ns

- Normal, peak detect, averaging, high resolution and segmented modes

- Multiple trigger sources, modes, coupling and selections

- Cursor, automatic and counter waveform measurements

- Conventional arithmetic and FFT math functions

- Built-in function/arbitrary waveform generator and digital voltmeter

- GPIB or USB interfaces for remote control

Número do lote: 16
Designação do lote: Lot 16 – 500 MHz, 4 Analog Channels Oscilloscope
Breve descrição:

- 4 analog channels- Minimum 500 MHz bandwidth- Calculated rise time (10 - 90%) equal or below 700 ps- 2.5 GS/s sample rate on all channels- 5 mega point record length on all channels- >50,000 wfm/s maximum wafeform capture rate- Analogue inputso Hardware bandwidth limits of 20 MHz and 150 MHzo AC, DC and GND couplingo Selectable input impedance of 1 M, 75 and 50o Input sensitivity range of 1 mV/div to 10 V/div at 1 M and 1 mV/div to 1 V/div at 75, 50o 8 bits vertical resolution (11 bits with Hi Res)o Maximum input voltage of 300 Vrms, ± 450 Vpko Channel-to-channel isolation > 100:1 from DC to 100 MHzo Offset range up to ± 100 Vo 1 ns/div to 1000 s/div time base range with ± 10 ppm accuracyo Main, zoom, roll and XY modes- Sample, peak detect, averaging, envelope, high resolution and roll acquisition modes- Multiple trigger sources, modes, coupling and selections- Cursor, automatic and counter waveform measurements- Conventional arithmetic and FFT math functions- 9 in. WVGA widescreen color display- USB 2.0 connectivity- Integrated 10/100 Ethernet port for network connection- Video out port to export oscilloscope display to a monitor or projector

- 4 analog channels

- Minimum 500 MHz bandwidth

- Calculated rise time (10 - 90%) equal or below 700 ps

- 2.5 GS/s sample rate on all channels

- 5 mega point record length on all channels

- >50,000 wfm/s maximum wafeform capture rate

o Hardware bandwidth limits of 20 MHz and 150 MHz

o AC, DC and GND coupling

o Selectable input impedance of 1 M, 75 and 50

o Input sensitivity range of 1 mV/div to 10 V/div at 1 M and 1 mV/div to 1 V/div at 75, 50

o 8 bits vertical resolution (11 bits with Hi Res)

o Maximum input voltage of 300 Vrms, ± 450 Vpk

o Offset range up to ± 100 V

o 1 ns/div to 1000 s/div time base range with ± 10 ppm accuracy

- Sample, peak detect, averaging, envelope, high resolution and roll acquisition modes

- 9 in. WVGA widescreen color display

- USB 2.0 connectivity

- Integrated 10/100 Ethernet port for network connection

- Video out port to export oscilloscope display to a monitor or projector

Número do lote: 17
Designação do lote: Lot 17 – 6.5 Digits Digital Multimeters
Breve descrição:

- Data rate of 50000 readings/s with 4.5…

… digits- Data rate of 10000 readings/s with 5.5 digits- Data rate of 1000 readings/s with 6.5 digits- Memory for 50000 readings- Ability to measure DC voltage, AC voltage, DC current, AC current, 2-wire resistance, 4-wire resistance, frequency, period, continuity, diode test, capacitance and temperature.- Adjustabel reading ranges :- DC Voltage : 100 mV to 1000V- AC Voltage : 100mV to 750V- Resistance : 100 Ω to 1GΩ- DC Current : 100 A to 3A- AC Current : 100A to 3A- Capacitance: 1nF to 10F- Maximum noise level of 30 ppm when acquiring data at 50000 readings/s- Maximum noise level of 0.03 ppm when acquiring data at 0.6 readings/s- Additional Specs for DC Voltage reading:- Adjustable input impedance between 10MΩ and 10GΩ- GPIB Interface- Rack mount kit

… digits

- Data rate of 10000 readings/s with 5.5 digits

- Data rate of 1000 readings/s with 6.5 digits

- Memory for 50000 readings

- Ability to measure DC voltage, AC voltage, DC current, AC current, 2-wire resistance, 4-wire resistance, frequency, period, continuity, diode test, capacitance and temperature.

- Adjustabel reading ranges :

- DC Voltage : 100 mV to 1000V

- AC Voltage : 100mV to 750V

- Resistance : 100 Ω to 1GΩ

- DC Current : 100 A to 3A

- AC Current : 100A to 3A

- Capacitance: 1nF to 10F

- Maximum noise level of 30 ppm when acquiring data at 50000 readings/s

- Maximum noise level of 0.03 ppm when acquiring data at 0.6 readings/s

- Additional Specs for DC Voltage reading:

- Adjustable input impedance between 10MΩ and 10GΩ

Quantidade ou extensão: Six Units
Número do lote: 18
Designação do lote: Lot 18 – 20Hz-2MHz Precision LCR Meter
Breve descrição:

- Precision LCR meter with working range from 20 Hz to 2 MHz, with 4-digit resolution in any…

… range- 0.05% basic accuracy with superior measurement repeatability at both low and high impedance- Built-in 40V DC Bias- 20 Vrms test signal- High-speed measurements, 5.6 ms- 201 points list sweep- LAN, USB and GPIB interfaces- Rack mount kit

… range

- 0.05% basic accuracy with superior measurement repeatability at both low and high impedance

- Built-in 40V DC Bias

- 20 Vrms test signal

- High-speed measurements, 5.6 ms

- 201 points list sweep

- LAN, USB and GPIB interfaces

Número do lote: 19
Designação do lote: Lot 19 – Multifunction Switch Measurement Unit
Breve descrição:

- System/assembly composed of multifunction switch measurement unit, quad 4x32 reed matrix and terminal…

… block- Multifunction switch measurement unito 4x64 switching matrix with 2 wires per contact pointo Maximum voltage of 100Vo Maximum current of 500mAo Bandwidth of 20 MHzo Two wire offset voltage no larger than 20µVo DC channel isolation no smaller than 10GΩo Input closed channel resistance <1.5 Ωo Open/close time < 1mso Typical relay life no smaller than 109 operationso GPIB remote control interface- Quad 4x32 reed matrixo 4x128, 8x64 or 16x32 1-wire configurationso 4x64 or 8x32 2-wire configurationso 100V, 0.5A switch/carry currento Reed relays with high speed path switchingo Relay cycle countero Row expansion and row disconnect for creating larger matriceso Row protection bypass switch for low level measurementso Optional configuration block or high density screw terminal block- Terminal blocko The terminal block is used for discrete wiring. A fully loaded terminal blocks supporting up to 20 AWG wire size typical or up to 24 AWG if all 144 lines are used. Expansion headers should also be provided for creating larger matrices.

… block

- Multifunction switch measurement unit

o 4x64 switching matrix with 2 wires per contact point

o Maximum voltage of 100V

o Maximum current of 500mA

o Bandwidth of 20 MHz

o Two wire offset voltage no larger than 20µV

o DC channel isolation no smaller than 10GΩ

o Input closed channel resistance <1.5 Ω

o Open/close time < 1ms

o Typical relay life no smaller than 109 operations

o GPIB remote control interface

- Quad 4x32 reed matrix

o 4x128, 8x64 or 16x32 1-wire configurations

o 4x64 or 8x32 2-wire configurations

o 100V, 0.5A switch/carry current

o Reed relays with high speed path switching

o Relay cycle counter

o Row expansion and row disconnect for creating larger matrices

o Row protection bypass switch for low level measurements

o Optional configuration block or high density screw terminal block

- Terminal block

o The terminal block is used for discrete wiring. A fully loaded terminal blocks supporting up to 20 AWG wire size typical or up to 24 AWG if all 144 lines are used. Expansion headers should also be provided for creating larger matrices.

Número do lote: 20
Designação do lote: Lot 20 – USB/GPIB High-Speed Interface and Cables
Breve descrição:

- USB/GPIB Interface high-speed USB 2 controller (plug and…

… play)o USB 2.0 interface (USB 1.1 compatible) and IEEE-488 interface (connect up to 14 GPIB instruments)o High-speed - transfer over 1.15MB/seco Parallel polling (check response of up to 8 devices at one single poll)o Software libraries includedo Total of at least 4 individual GPIB-USB controllers required- Standard GPIB calbleso GPIB cables fully compatible with IEEE 488.1 mechanical specificationo Length of at least 1 mo Total of at least 17 cables required

… play)

o USB 2.0 interface (USB 1.1 compatible) and IEEE-488 interface (connect up to 14 GPIB instruments)

o High-speed - transfer over 1.15MB/sec

o Parallel polling (check response of up to 8 devices at one single poll)

o Software libraries included

o Total of at least 4 individual GPIB-USB controllers required

- Standard GPIB calbles

o GPIB cables fully compatible with IEEE 488.1 mechanical specification

o Length of at least 1 m

o Total of at least 17 cables required

Quantidade ou extensão: 1 (this unit includes at least 4 GPIB-USB controllers and 17 GPIB cables)

Lot # Description and Quantity

1 High Power DC Supply 2

2 Precision Power Supplies and Meter 7

3 High-Voltage Precision Power Supply and Meter 1

4 Picoammeter Voltage Source 2

5 80W Triple DC Power Supply 2

6 35W Triple DC Power Supply 1

7 Dual Channel Battery Simulator 1

8 AC and DC Current Source 2

9 80 MHz Function/Arbitrary Waveform Generator 1

10 Dual Channel 30MHz Arbitrary Waveform Generator 1

11 6 GHz Arbitrary Signal Generator 1

12 High Sampling Rate 2-Channel Lock-In Amplifier 1

13 High-Frequency Lock-In Amplifier 1

14 Low-Noise Voltage Preamplifier 1

15 100 MHz, 4 Analog Plus 16 Digital Channels Oscilloscope 2

16 500 MHz, 4 Analog Channels Oscilloscope 1

17 6.5 Digits Digital Multimeter 6

18 20Hz-2MHz Precision LCR Meter 1

19 Multifunction Switch Measurement Unit 1

20 USB/GPIB High-Speed Interface and Cables 1

Número de referência: Aw/jg,jp,rf
Nome do projeto ou programa financiado pela UE:

THIS PROJECT WILL BE CO-FINANCED BY THE EUROPEAN REGIONAL DEVELOPMENT FUND (ERDF), NAMELY THROUGH THE PROGRAMA OPERACIONAL REGIONAL DO NORTE ON.2 (Portugal)

Local de actuação
Local principal ou local de actuação:

Avenida Mestre José Veiga

Braga 4715-330

Portuga

Informações jurídicas, económicas, financeiras e técnicas
Execução do contrato
Depósitos e garantias exigidos:

Bank Guarantee 10% of Contract Value for Duration of the Warranty Period for contracts of value equal to or greater than EUR18,000.00

Procedimento
Línguas
Língua: inglês 🗣️

Entidade adjudicante
Contacto
Ponto de contacto: http://inl.int/contractors_projects?section=contract-opportunities
Adrian Watson
Endereço Internet: www.inl.int 🌏
Endereço do perfil de comprador: http://inl.int/contractors/info 🌏
URL dos documentos: http://inl.int/contractors_projects?section=contract-opportunities 🌏

Referência
Identificadores
Número de referência atribuído pela autoridade adjudicante: Aw/jg,jp,rf
Fonte: OJS 2013/S 126-215475 (2013-06-27)

Anúncio de adjudicação (2013-10-04)
Objecto
Âmbito do concurso
Valor total do procedimento: 139 663 💰
Metadados do anúncio
Tipo de documento: Anúncio de adjudicação

Procedimento
Tipo de proposta: Não consta

Referência
Datas
Data de envio: 2013-10-04 📅
Data de publicação: 2013-10-09 📅
Identificadores
Número do anúncio: 2013/S 196-338340
Refere-se ao anúncio: 2013/S 126-215475
Número JO-S: 196

Procedimento
Critérios de atribuição
Critério: 1. Technical quality (20)
2. Price (15)
3. Delivery schedule (15)
4. Payment terms (10)
5. Warranty (10)
6. Technical assistance (5)
7. Installation and training (5)
8. List of references (5)
9. Improvements (15)

Adjudicação do contrato

1️⃣
Data de celebração do contrato: 2013-09-23 📅
Nome: DEC.MEDIDA - Instrumentação, Controle e Telecomunicações, S.A.
Endereço postal: Rua Pedro Nunes, 47 B/C
Cidade postal: Lisbon
Código postal: 1050-170
País: Portugal 🇵🇹
Endereço Internet: http://www.decmed.pt/ 🌏

2️⃣
Endereço Internet: www.decmed.p 🌏

3️⃣

4️⃣

5️⃣

6️⃣
Nome: eNGN Technologies – Soluções de Medida e Telecomunicações, Lda.,
Endereço postal: Taguspark – Parque de Ciência e Tecnologia Núcleo Central, 150
Cidade postal: Porto Salvo
Código postal: 2740-122
Correio electrónico: engn@engn.pt 📧
Endereço Internet: http://www.engn.pt/ 🌏

7️⃣

8️⃣

9️⃣

1️⃣0️⃣

1️⃣1️⃣

1️⃣2️⃣
Nome: Zurich Instruments AG
Endereço postal: Technoparkstrasse 1
Cidade postal: Zurich
Código postal: 8005
País: Suíça 🇨🇭
Correio electrónico: info@zhinst.com 📧
Endereço Internet: http://www.zhinst.com/ 🌏

1️⃣3️⃣

1️⃣4️⃣

1️⃣5️⃣

1️⃣6️⃣
Endereço Internet: www.decmed.pt 🌏

1️⃣7️⃣
Endereço Internet: www.engn.pt 🌏

1️⃣8️⃣

1️⃣9️⃣
Nome: eNGN Technologies – Soluções de Medida e Telecomunicações, Lda

2️⃣0️⃣
Endereço Internet: http://www.engn.pt 🌏
Informações sobre concursos
Número de propostas recebidas: 2
1
Fonte: OJS 2013/S 196-338340 (2013-10-04)

Novas aquisições em categorias conexas 🆕

Maquinaria, aparelhagem, equipamento e consumíveis eléctricos; iluminação (3 novas aquisições)

Material electrónico, electromecânico e electrotécnico (2)

Equipamento electrónico (1)